|
Cause of defect
|
Way of elimination
|
Incomplete deenergizing of coupling (coupling "conducts")
|
|
Коробление a conducted disk
(Face palpation more than 0,5 mm)
|
Correct a disk or replace new
|
|
Easing of rivets or breakage of frictional overlays of a conducted disk
|
Replace a conducted disk in gathering
|
|
Jamming of a nave of a conducted disk
On шлицах a primary shaft
|
Clear шлицы, wash out Uajt-spiritom. At deterioration шлицев replace a primary shaft or a conducted disk
|
|
Air in system of a hydrodrive of coupling
|
Pump over system. The course of a rod of the working cylinder should be not less than 24 mm
|
|
Leak of a liquid from hydrodrive system through connections or the damaged pipelines
|
Tighten connections, replace the damaged details, pump over hydrodrive system
|
|
Leak of a liquid from the main cylinder or the working cylinder of a drive of deenergizing of coupling
|
Replace sealing elements or replace cylinders in gathering, pump over system
|
|
Warp or коробление a press disk
|
Replace a casing of coupling with a press disk in gathering
|
|
Palpation of petals of a press spring more than 0,8 mm
|
Replace a casing of coupling with a press disk in gathering
|
Incomplete inclusion of coupling (coupling "slips")
|
|
The raised deterioration or burning of frictional overlays of a conducted disk
|
Replace a conducted disk in gathering
|
|
Замасливание frictional overlays of a conducted disk, surfaces of a flywheel and a press disk
|
Carefully wash out Uajt-spiritom of a surface, eliminate the reasons замасливания disks
|
|
The compensatory aperture is littered
The main cylinder
|
Wash out the cylinder, clean a compensatory aperture, pump over system
|
|
Damage or jamming of a drive of deenergizing of coupling
|
Eliminate the reasons causing jamming. Replace the damaged details
|
|
Jerks at coupling work
|
|
Jamming of a nave of a conducted disk on шлицах a primary shaft
|
Clear шлицы, wash out Uajt-spiritom. At deterioration шлицев replace a primary shaft or a conducted disk
|
|
Замасливание frictional overlays of a conducted disk, surfaces of a flywheel and a press disk
|
Carefully wash out Uajt-spiritom greasy surfaces, eliminate the reasons замасливания disks
|
|
Jamming in the mechanism of a drive of deenergizing of coupling
|
Replace the damaged details, eliminate the reasons causing jamming
|
|
Easing of rivets of frictional overlays of a conducted disk
|
Replace a conducted disk in gathering
|
|
Damage of a surface or коробление a press disk
|
Replace a casing of coupling with a press disk in gathering
|
|
The raised noise at coupling deenergizing
|
|
Deterioration, damage or leak of greasing from the bearing of deenergizing of coupling
|
Replace муфту deenergizings of coupling with the bearing in gathering
|
|
Deterioration of the forward bearing of a primary shaft of a transmission
|
Replace the bearing
|
|
The raised noise at coupling inclusion
|
|
Breakage or decrease in elasticity of springs демпфера
|
Replace a conducted disk in gathering
|