Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
7.1. Features of a design
7.2. Survey and steering check on the car
7.3. Check of a tension and adjustment of a belt of a drive of the pump of the hydraulic booster
7.4. Liquid replacement in hydrosystem of the amplifier of a steering
7.5. Replacement of a tank of hydrosystem of the amplifier of a steering
7.6. Prorolling of system of the hydraulic booster of a steering
7.7. Backlash adjustment in gearing of a roller with a worm
7.8. Removal and steering wheel installation
7.9. Replacement of shaft of a steering
7.10. Replacement of steering draughts
7.11. Removal and installation of the steering mechanism
7.12. Removal and installation of the pump of the hydraulic booster
7.13. Removal and installation of the pendular lever
7.14. Dismantling, дефектовка and assemblage of the pendular lever
7.15. Possible malfunctions of a steering without the hydraulic booster, their reasons and ways of elimination
7.16. Possible malfunctions of the hydraulic booster of a steering, their reason and ways of elimination
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 











7-12-snyatie-i-ustanovka-nasosa-gidrousilitelya.html

7.12. Removal and installation of the pump of the hydraulic booster

At failure the pump replace in gathering as its repair demands application of the special equipment and the tool.

       THE NOTE
If the new pump is not completed by the union for hose connection, turn out the union from the old pump and establish it in the new.

It be required to you: keys «on 13», «on 22», a screw-driver.
1. Remove a belt of a drive of the pump of the hydraulic booster (Check of a tension and adjustment of a belt of a drive of the pump of the hydraulic booster »see«).
2. Merge a liquid from amplifier hydrosystem (liquid Replacement in hydrosystem of the amplifier of a steering »see«).
3. Turn out a bolt-union of a hose of a high pressure.
4. Pay attention to a condition of copper linings. Погнутые or strongly pressed out linings replace.
5. Ослабьте a collar of a bringing hose and...
6.... Remove a hose from the union.
7. Turn away a nut of a bolt of fastening of the pump to a tension lath and...
8.... Take out a bolt and распорную the plug.
9. Turn away a nut of the bottom bolt and...
10.... Having taken out a bolt, remove the hydraulic booster pump.
11. Establish the pump in an order, the return to removal. After installation fill with a liquid and pump over amplifier hydrosystem («Prorolling of system of the hydraulic booster of a steering» see).

«The previous page
7.11. Removal and installation of the steering mechanism
The following page»
7.13. Removal and installation of the pendular lever