Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
7.1. Features of a design
7.2. Survey and steering check on the car
7.3. Check of a tension and adjustment of a belt of a drive of the pump of the hydraulic booster
7.4. Liquid replacement in hydrosystem of the amplifier of a steering
7.5. Replacement of a tank of hydrosystem of the amplifier of a steering
7.6. Prorolling of system of the hydraulic booster of a steering
7.7. Backlash adjustment in gearing of a roller with a worm
7.8. Removal and steering wheel installation
7.9. Replacement of shaft of a steering
7.10. Replacement of steering draughts
7.11. Removal and installation of the steering mechanism
7.12. Removal and installation of the pump of the hydraulic booster
7.13. Removal and installation of the pendular lever
7.14. Dismantling, дефектовка and assemblage of the pendular lever
7.15. Possible malfunctions of a steering without the hydraulic booster, their reasons and ways of elimination
7.16. Possible malfunctions of the hydraulic booster of a steering, their reason and ways of elimination
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 















7-8-snyatie-i-ustanovka-rulevogo-kolesa.html

7.8. Removal and steering wheel installation

Steering wheel remove for its replacement at damage or for replacement of a shaft of a steering.
1. Disconnect a wire from the plug «–» the storage battery.
2. Establish wheels in position of rectilinear movement.
3. Remove an overlay of the switch of a sound signal.
4. Disconnect колодку wires from a contact ring.
5. Turn away a nut of fastening of a steering wheel.

       GOOD ADVICE
The steering wheel very densely sits on шлицах a shaft, therefore do not turn on completely a nut of fastening of a wheel: at sharp blow during removal a steering wheel, having come off with шлицев, can put a trauma. For convenience of return installation mark position of a steering wheel concerning a shaft.

6. Sharp blows of hands bring down a steering wheel with шлицев a steering shaft.
7. Definitively turn away a nut of fastening and remove a steering wheel.
8. Establish a steering wheel in an order, the return to removal, according to earlier made marks.


«The previous page
7.7. Backlash adjustment in gearing of a roller with a worm
The following page»
7.9. Replacement of shaft of a steering