Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
7.1. Features of a design
7.2. Survey and steering check on the car
7.3. Check of a tension and adjustment of a belt of a drive of the pump of the hydraulic booster
7.4. Liquid replacement in hydrosystem of the amplifier of a steering
7.5. Replacement of a tank of hydrosystem of the amplifier of a steering
7.6. Prorolling of system of the hydraulic booster of a steering
7.7. Backlash adjustment in gearing of a roller with a worm
7.8. Removal and steering wheel installation
7.9. Replacement of shaft of a steering
7.10. Replacement of steering draughts
7.11. Removal and installation of the steering mechanism
7.12. Removal and installation of the pump of the hydraulic booster
7.13. Removal and installation of the pendular lever
7.14. Dismantling, дефектовка and assemblage of the pendular lever
7.15. Possible malfunctions of a steering without the hydraulic booster, their reasons and ways of elimination
7.16. Possible malfunctions of the hydraulic booster of a steering, their reason and ways of elimination
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 















7-9-zamena-valov-rulevogo-upravleniya.html

7.9. Replacement of shaft of a steering

Steering shaft change at their damage carving or шлицевых shafts, люфте карданных hinges of an intermediate shaft, and also at a curvature at failure.

Replacement of an intermediate shaft
Keys «on 13» (two) be required to you.
1. For convenience of work remove the bottom casing of a shaft of a steering column (Removal and installation of the panel of devices »see«).
2. Turn away a nut of a coupling bolt карданного the hinge of an intermediate shaft and take out a bolt.
3. Turn away a nut of a coupling bolt карданного the hinge of a shaft of a steering column and take out a coupling bolt.
4. Separate an intermediate shaft and a shaft of a steering column, take out an intermediate shaft.
5. Establish a new intermediate shaft in an order, the return to removal.

Replacement of a shaft of a steering column
It be required to you: a key or a replaceable head «on 13».
1. Remove a steering wheel (Removal and steering wheel installation »see«).
2. Remove casings of a shaft of a steering column (Removal and installation of the panel of devices »see«).
3. Disconnect pad wires from подрулевого the switch. Do not forget to mark them not to mix at installation.
4. Remove подрулевой the switch (Replacement подрулевого the switch »see«).
5. Remove the switch (lock) of ignition (Removal and installation of the switch of ignition »see«).
6. Turn away a nut of a coupling bolt карданного the hinge of a shaft of a steering column and take out a coupling bolt.
7. Separate an intermediate shaft and a shaft of a steering column.
8. Turn on two nuts (on a photo one is visible) and...
9.... Two bolts (on a photo one is visible) fastenings of an arm of a shaft of a steering column.
10. Remove a shaft of a steering column in gathering with an arm from two hairpins of a body.
11. Establish a shaft of a steering column in an order, the return to removal.

«The previous page
7.8. Removal and steering wheel installation
The following page»
7.10. Replacement of steering draughts