Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
7.1. Features of a design
7.2. Survey and steering check on the car
7.3. Check of a tension and adjustment of a belt of a drive of the pump of the hydraulic booster
7.4. Liquid replacement in hydrosystem of the amplifier of a steering
7.5. Replacement of a tank of hydrosystem of the amplifier of a steering
7.6. Prorolling of system of the hydraulic booster of a steering
7.7. Backlash adjustment in gearing of a roller with a worm
7.8. Removal and steering wheel installation
7.9. Replacement of shaft of a steering
7.10. Replacement of steering draughts
7.11. Removal and installation of the steering mechanism
7.12. Removal and installation of the pump of the hydraulic booster
7.13. Removal and installation of the pendular lever
7.14. Dismantling, дефектовка and assemblage of the pendular lever
7.15. Possible malfunctions of a steering without the hydraulic booster, their reasons and ways of elimination
7.16. Possible malfunctions of the hydraulic booster of a steering, their reason and ways of elimination
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 











7-13-snyatie-i-ustanovka-mayatnikovogo-rychaga.html

7.13. Removal and installation of the pendular lever

The pendular lever remove for repair or for replacement at damage.

       THE NOTE
Work is more convenient for carrying out on the lift. It is possible to execute it and on the car established on support.

It be required to you: keys «on 17», «on 22», a stripper for выпрессовки a finger of the spherical hinge, пассатижи.
1. Disconnect from the pendular lever fingers of spherical hinges of the right lateral and average steering draughts («Replacement of steering draughts» see).
2. Turn out two bolts of fastening of an arm of the pendular lever to a longeron, holding nuts of bolts.
3. Remove nuts, take out bolts of fastening of an arm of the lever and...
4.... Remove the lever from the car.
5. Establish the pendular lever in an order, the return to removal.

«The previous page
7.12. Removal and installation of the pump of the hydraulic booster
The following page»
7.14. Dismantling, дефектовка and assemblage of the pendular lever