10-15-zamena-remnejj-bezopasnosti.html
10.15. Replacement of seat beltsIt be required to you: keys «on 13», «on 17», screw-drivers with a flat and crosswise edge.
1. For removal of back seat belts cast away forward back seats.
|
2. Remove back facings of thresholds of a floor from both parties of salon («Removal of upholsteries of salon» see).
|
|
|
3. Remove decorative overlays of fastening of seat belts.
|
4. Turn out bolts of the bottom fastening of seat belts.
|
|
THE NOTE
Pay attention to presence and mutual position of washers.
|
|
|
5. Remove a luggage carrier upholstery («Removal of upholsteries of salon» see).
|
6. Turn out bolts of fastening of inertial coils and...
|
|
|
7.... Remove coils. Pay attention to presence and mutual position of washers of a bolt of fastening of the coil.
|
8. Take belts through cuts in overlays боковин.
|
|
|
9. Remove decorative overlays of the top fastenings of seat belts.
|
10. Turn out bolts of the top fastenings of seat belts.
|
|
|
11. Remove plastic caps from bolts of the bottom fastenings of belts.
|
12. Turn out bolts and remove belts.
|
|
13. For replacement of a forward seat belt turn out a bolt of its fastening in a back part of a sled of a forward seat.
|
|
|
14. Remove a decorative cap from the bottom bolt of fastening of a belt (the forward seat is for descriptive reasons removed) and...
|
15.... Turn out a bolt.
|
|
|
16. Remove a decorative overlay of the top fastening of a seat belt and...
|
17.... Turn out a bolt of the top fastening.
|
|
|
18. Remove the bottom part of an upholstery of the central rack («Removal of upholsteries of salon» see) and turn out screws of fastening of an eye of a belt.
|
19. Remove a belt eye.
|
|
|
20. Turn out a bolt of fastening of the inertial coil and...
|
21.... Take the coil together with a belt from the central rack of a body.
|
|
|
22. To remove the mechanism of adjustment of position of the top point of fastening of a seat belt on height, remove the top part of an upholstery of the central rack of a body («Removal of upholsteries of salon» see) and turn out two bolts of fastening of the mechanism to a rack.
|
23. Remove the mechanism, clear and grease rubbing surfaces with greasing Litol-24 or similar.
|
24. Establish a seat belt and all removed details in an order, the return to removal.
|
|
|