Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
8. Brake system
9. An electric equipment
10. A body
10.1. Features of a design
10.2. Removal and installation of lobbies Lockers
10.3. Removal and installation of forward wings
10.4. Removal and installation of decorative overlays on forward wings and doors
10.5. Replacement of buffers
10.6. Removal and installation of facing of a radiator
10.7. Removal and cowl installation
10.8. Removal, installation and adjustment of the lock and a drive of the lock of a cowl
10.9. A back door
10.10. Forward doors
10.11. Back doors
10.12. Removal and installation of a cover of the hatch of a fuel tank
10.13. Seats
10.14. Removal of upholsteries of salon
10.15. Replacement of seat belts
10.16. Mirrors
10.17. Replacement противосолнечных peaks
10.18. Replacement of hand-rail
10.19. Removal and installation of facing of a tunnel of a floor
10.20. Removal and installation of the panel of fastening of a radio receiver
10.21. Removal and installation of the panel of devices
10.22. A heater
10.23. Replacement of a windscreen and glasses of a door of a back and боковины
10.24. Care of a body
10.25. Anticorrosive protection of a body
10.26. Possible malfunctions of a body, their reason and ways of elimination
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 















10-13-sidenya.html

10.13. Seats

Removal and installation of a forward seat and replacement of a sled
It be required to you: keys «on 8», «on 13», a screw-driver.
1. Remove a forward seat in extreme back position.
2. Turn on two forward nuts of fastening of a sled.
3. Move a seat in extreme forward position and turn out the screw of fastening of a decorative overlay in a back part of a sled.
4. Remove an overlay.
5. Turn away a back nut of fastening of a sled.
6. Turn out a bolt of fastening of a sled and...

THE NOTE
Under a bolt the spring washer is established.

7.... Take a seat from the car.
8. Turn out lobbies and...
9..... Back bolts of fastening of a sled to a seat and...
10.... Remove a sled.
11. Clear details of a sled and grease rubbing surfaces with greasing Litol-24 or similar.
12. Establish a sled on a seat and a seat on the car in an order, the return to removal.

Removal and installation of a back seat
It be required to you: keys «on 10», «on 13».
1. Take aside a luggage carrier rug.
2. Turn away six nuts of fastening of backs of a seat to a cross-beam and...
3.... Remove backs.
4. Raise pillows of a back seat, turn out four bolts of their fastening to a floor (the cover of the hatch of a compartment of a fuel tank is for descriptive reasons dismantled) and...
5.... Remove pillows.
6. Establish details of a back seat in an order, the return to removal.


«The previous page
10.12. Removal and installation of a cover of the hatch of a fuel tank
The following page»
10.14. Removal of upholsteries of salon