|
Cause of defect
|
Way of elimination
|
|
The cleaner electric motor does not work, the bimetallic safety lock does not work, and does not fuse safety lock F9 in the assembly block
|
|
Wires of a food of a motor-reducer are damaged, oxidised
Tips of wires in connecting колодках
|
Check up the wires, damaged replace. Smooth out tips
|
|
The cleaner switch is damaged
|
Replace the cleaner switch in подрулевом the switch
|
|
Lag of brushes of the electric motor, strong pollution or подгорание a collector
|
Check up, eliminate lag of brushes or replace the damaged details; smooth out a collector
|
|
Wire breakage in a winding of an anchor of the electric motor
|
Replace an anchor or a motor-reducer
|
|
The cleaner electric motor does not work, the bimetallic safety lock works, or fuses safety lock F9 in the assembly block
|
|
Levers of the mechanism of a cleaner are deformed and touch body details
|
Check up, correct levers
Or replace a screen wiper
|
|
Brushes have frozen to glass
|
Separate brushes from glass, without supposing damage of a rubber tape
|
|
The extraneous subject has got to the cleaner mechanism
|
Check up, take a subject
|
|
Short circuit in a winding of an anchor of the electric motor
|
Replace a motor-reducer or an electric motor anchor
|
|
The cleaner electric motor does not work in a faltering mode
|
|
The cleaner switch is damaged
|
Replace the cleaner switch in подрулевом the switch
|
|
The cleaner relay is damaged
|
Replace the relay
|
|
The cleaner electric motor does not stop in a faltering mode
|
|
The cleaner relay is damaged
|
Replace the cleaner relay
|
|
Bad clip of contact petals of the trailer switch to a motor-reducer gear wheel
|
Turn in contact petals of the trailer switch
|
|
Pollution of contacts of the trailer switch in a motor-reducer
|
Smooth out switch contacts
|
|
The cleaner electric motor works, brushes not движутся
|
|
Teeths of a gear wheel of a motor-reducer are broken
|
Replace a gear wheel
|
|
Weak fastening of a crank on an axis of a gear wheel of a motor-reducer
|
Check up, tighten a nut of fastening of a crank, having established it in final position
|