Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
5. Transmission
6. A running gear
7. A steering
8. Brake system
9. An electric equipment
9.1. Features of a design
9.2. Safety locks and the relay
9.3. The generator
9.4. Possible malfunctions of the generator, their reason and ways of elimination
9.5. A starter
9.6. Possible malfunctions of a starter, their reason and ways of elimination
9.7. The switch (lock) of ignition
9.8. Replacement and service of spark plugs
9.9. A control system of the engine
9.10. Illumination, the light and sound alarm system
9.11. Possible malfunctions of illumination and the light alarm system, their reason and ways of elimination
9.12. Screen wipers
9.13. Possible malfunctions of a screen wiper of a windscreen, their reason and ways of elimination
9.14. Removal and installation of a washer of a windscreen
9.15. Removal and installation of a washer of glass of a door of a back
9.16. The electric motor of the fan of a heater
9.17. Possible malfunctions of the electric motor of the fan of a heater, their reason and ways of elimination
9.18. The electric motor of the fan of system of cooling of the engine
9.19. A combination of devices
9.20. Possible malfunctions of control devices, their reasons and ways of elimination
9.21. Replacement of the block of switches of the proof-reader of headlights and свещения devices
9.22. Replacement of the switch of the alarm system
9.23. Replacement подрулевого the switch
9.24. Replacement of gauges and switches
9.25. Электростеклоподъемники forward doors
9.26. System of blocking of locks of doors
9.27. A heating system of glass of a door of a back
9.28. Automobile anticreeping system (АПС)
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 













9-14-snyatie-i-ustanovka-omyvatelya-vetrovogo-stekla.html

9.14. Removal and installation of a washer of a windscreen

The washer pump represents not folding design and at all defects is subject to replacement.

       THE PREVENTION
Do not include the pump electric motor if заборник the pump it is not shipped in a liquid, differently the winding of an anchor of the electric motor can burn down (short-term inclusion on 1–2 with for check of work of the electric motor) is supposed.

1. Disconnect a wire from the plug «–» the storage battery.
2. Disconnect two pad wires from conclusions of the electric motor of the pump.
3. Disconnect a hose from the union of the pump and merge from a tank a liquid.

       THE NOTE
If in a tank there is a liquid, muffle an aperture of the union of the pump.

4. Remove a belt of fastening of a tank and...
5.... Remove the pump from a tank.
6. Replace the cracked or lost elasticity the sealing plug.
7. Establish the new pump in an order, the return to removal.

«The previous page
9.13. Possible malfunctions of a screen wiper of a windscreen, their reason and ways of elimination
The following page»
9.15. Removal and installation of a washer of glass of a door of a back