Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
4.1. Features of a design
4.2. A good advice
4.3. Removal and installation of a decorative casing of the engine
4.4. Removal and installation of protection oil crankcase and an engine mudguard
4.5. Replacement of a cooling liquid
4.6. Oil replacement in the engine and the oil filter
4.7. Clearing of system of ventilation crankcase
4.8. Replacement of support of a suspension bracket of the power unit
4.9. Installation of the piston of the fourth cylinder in position ВМТ of a step of compression
4.10. Check and installation of phases timing on labels
4.11. Replacement натяжителя chains of a drive of a camshaft
4.12. Replacement успокоителя chains of a drive of a camshaft
4.13. Boot replacement натяжителя chains of a drive of a camshaft
4.14. Replacement of a chain of a drive of a camshaft
4.15. Replacement of hydrosupport of levers of a drive of valves
4.16. Removal, installation and дефектовка a flywheel
4.17. Replacement of the forward bearing of a primary shaft of a transmission
4.18. Replacement of details of consolidation of the engine
4.19. Camshaft replacement
4.20. A head of the block of cylinders
4.21. Removal and engine installation
4.22. Engine repair
4.23. Greasing system
4.24. Cooling system
4.25. System of release of the fulfilled gases
4.26. The power supply system
4.27. Possible malfunctions of the engine, their reason and ways of elimination
5. Transmission
6. A running gear
7. A steering
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 











4-12-zamena-uspokoitelya-cepi-privoda-raspredelitelnogo-vala.html

4.12. Replacement успокоителя chains of a drive of a camshaft

Успокоитель it is located in a forward part of a head of the block at the left and it is attached to it outside by two bolts. At deterioration or damage успокоителя on some power setting there can be resonant fluctuations of a leading branch of a chain that can lead перескакиванию to a chain on teeths of an asterisk of a camshaft and to serious damage of the engine.
It be required to you: a screw-driver, a key (it is desirable face) «on 10».
1. Uncover heads of the block of cylinders («Replacement of a lining of a cover of a head of the block of cylinders» see).
2. Remove натяжитель chains of a drive of a camshaft (Replacement натяжителя chains of a drive of a camshaft »see«).
3. Remove from a flange of a camshaft an asterisk, without separating it with a chain (Check and installation of phases timing on labels »see«).
4. Turn out two bolts of fastening успокоителя, having begun with the bottom bolt, and...
5.... Having fixed an asterisk together with a chain, as is shown in a photo, remove успокоитель, having taken out the top bolt of fastening.

       THE PREVENTION
At removal успокоителя reliably keep his hand, differently fallen in the oil pallet успокоитель it will be very difficult to take.

6. Examine removed успокоитель. If on its working surface there is a deep development from a chain and сколы or on the case успокоителя there are cracks and обломы, replace успокоитель.

       THE NOTE
Pay attention to the original form успокоителя – it differs from успокоителей, before applied on engines VAZ. Get precisely same успокоитель.

7. Establish new успокоитель in an order, the return to removal.
8. Establish earlier removed details upside-down.

«The previous page
4.11. Replacement натяжителя chains of a drive of a camshaft
The following page»
4.13. Boot replacement натяжителя chains of a drive of a camshaft