Chevrolet-Niva
1. The car device
2. Recommendations about operation
3. Malfunctions in a way
4. The engine
4.1. Features of a design
4.2. A good advice
4.3. Removal and installation of a decorative casing of the engine
4.4. Removal and installation of protection oil crankcase and an engine mudguard
4.5. Replacement of a cooling liquid
4.6. Oil replacement in the engine and the oil filter
4.7. Clearing of system of ventilation crankcase
4.8. Replacement of support of a suspension bracket of the power unit
4.9. Installation of the piston of the fourth cylinder in position ВМТ of a step of compression
4.10. Check and installation of phases timing on labels
4.11. Replacement натяжителя chains of a drive of a camshaft
4.12. Replacement успокоителя chains of a drive of a camshaft
4.13. Boot replacement натяжителя chains of a drive of a camshaft
4.14. Replacement of a chain of a drive of a camshaft
4.15. Replacement of hydrosupport of levers of a drive of valves
4.16. Removal, installation and дефектовка a flywheel
4.17. Replacement of the forward bearing of a primary shaft of a transmission
4.18. Replacement of details of consolidation of the engine
4.19. Camshaft replacement
4.20. A head of the block of cylinders
4.21. Removal and engine installation
4.22. Engine repair
4.23. Greasing system
4.24. Cooling system
4.25. System of release of the fulfilled gases
4.26. The power supply system
4.27. Possible malfunctions of the engine, their reason and ways of elimination
5. Transmission
6. A running gear
7. A steering
8. Brake system
9. An electric equipment
10. A body
11. Variants of execution of the car
12. Care of the car
13. Purchase of spare parts
14. A trip on HUNDRED
15. Winter operation of the car
16. Preparation for checkup
17. Appendices
 













4-4-snyatie-i-ustanovka-zashhity-maslyanogo-kartera-i-bryzgovika-dvigatelya.html

4.4. Removal and installation of protection oil crankcase and an engine mudguard


The panel of protection oil crankcase, made of толстолистовой steels, serves for protection crankcase from damages at blows of a forward part of the car about road obstacles. The mudguard of a motor compartment located under it protects подкапотное space from pollution and is not power protection crankcase the engine.
To remove protection oil crankcase and a mudguard of a motor compartment it is necessary for providing of access to knots and units from below the car at maintenance service carrying out.
Keys «on 8» and «on 10» (it is recommended to use face G-shaped keys) be required to you.
1. Turn out four bolts of fastening and...
2.... Remove protection.
3. Turn out six self-cutting screws and...
4.... Remove a mudguard of a motor compartment.
5. Establish a mudguard and protection in an order, the return to removal.

«The previous page
4.3. Removal and installation of a decorative casing of the engine
The following page»
4.5. Replacement of a cooling liquid